Kodak I3400 Manuel d'utilisateur télécharger pdf (Page 30)

A-61771 September 2012 5-5

Cleaning the feed module

tires

9. Clean the feed module tires by manually rotating and wiping the feed

module tires with a roller cleaning pad. For best results wipe parallel to the

ribs in order to remove any residue between the ribs. You do not need to

remove the feed module to clean the tires.

10. Inspect the tires. If the tires show signs of wear or damage, replace the

feed module tires or the feed module. See “Replacement procedures” later

in this chapter.

Cleaning the background

strip(s)

11. Wipe the upper and lower background strips with a Staticide wipe.

12. Wipe the upper and lower background strips again with an almost-dry

Staticide wipe to remove any streaks.

Cleaning the imaging

guides

13. Wipe the upper and lower imaging guides with a Staticide wipe.

14. Wipe the upper and lower imaging guides again with an almost-dry

Staticide wipe to remove any streaks.

15. Close the scanner cover.

16. When finished with all cleaning procedures, turn on the scanner.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 46 47

Pas de commentaire

Kodak I3400 Manuel d'utilisateur Page 30