Kodak I3400 Manuel d'utilisateur télécharger pdf (Page 33)

5-8 A-61771 September 2012

6. Replace each tire by sliding the tire off the core.

7. Install each new tire by gently pulling it over the core. The tires do not need

to be installed in any specific orientation.

IMPORTANT:Do not overstretch the tire; it may tear.

8. Replace each core assembly in the lower feed module housing and align

the tabs on the upper housing with the slots on the lower housing.

9. Press the upper and lower housings together until they snap into place.

10. Push the feed module release lever to the right and insert the feed module

into position. Be sure the ends align and then release the feed module

release lever. Verify that the feed module is securely in place.

11. Close the scanner cover.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 46 47

Pas de commentaire

Kodak I3400 Manuel d'utilisateur Page 33