Kodak V600 Zoom Manuel d'utilisateur télécharger pdf (Page 33)

Troubleshooting

English

Lamp

Problem Cause and Solution

No light is coming from the

lamp.

• Make sure that the power cord is

properly connected to a fully functional

AC electric outlet. The Power light

blinks when the power is connected but

the projector is not turned on. The

Power light is a steady green when the

lamp is running.

• Make sure that the power cord is

properly connected to the projector.

• Make sure that you have removed the

lens cap on the projector lens at the front

of the projector.

• Make sure you have pressed the Power

button and the Power light is a steady

green.

• Check the projector's lamp to make sure

that it is securely connected in the lamp

module.

• Make sure that the lamp module door is

fully closed.

• Make sure that the cable connectors do

not have any bent pins.

• Replace the lamp.

Lamp shuts off. • A minor power surge may cause the

lamp to shut off. Press the Power button

twice to turn off the projector. (The

Power light continues to blink and the

fan continues to run until the projector

cools down.) Wait at least three minutes,

then press the Power button again.

• Replace the lamp module.

V600UserGuide.book Page 29 Tuesday, March 21, 2000 8:26 AM

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 43 44

Pas de commentaire

Kodak V600 Zoom Manuel d'utilisateur Page 33