Kodak A-41069 Manuel d'utilisateur télécharger pdf (Page 107)

8 - 16

A-41069 January 1993

Replacing the exposure

lamps

The exposure system consists of four (4) long-life flourescent lamps.

There are two lamp housings; one upper and one lower. Each lamp

housing contains two (2) lamps.

Change the lamps every five-hundred (500) hours, when image quality

appears to be degrading (and standard maintenance procedures do not

improve the image quality), or when requested to do so via an operator

message. Always replace both lamps in a housing at the same time, or

exposures may appear inconsistent. Always use the recommended

lamps, or image quality may be unacceptable.

1. Turn the side panel switch off.

2. Open the right side access door.

3. Remove the imaging guides.

(Refer to Changing the imaging guides. )

4. Grasp the tab at the end of the upper lamp housing and slide the

housing out of the track.

WARNING: Make sure the lamps are cool before attempting to

remove them from the lamp housing.

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 113 114

Pas de commentaire

Kodak A-41069 Manuel d'utilisateur Page 107