Kodak A-41069 Manuel d'utilisateur télécharger pdf (Page 106)

A-41069 January 1993

8 - 15

12. Grasp the replacement lamp by both ends with the clear stripe

pointing toward you.

13. Insert the lamp gently into the housing.

14. Rotate the lamp toward you until it snaps into place. The clear

stripe should disappear just below the lower edge of the DSA

assembly.

15. Replace the DSA window panel, turning the quarter-turn screws

clockwise one-quarter turn to secure the panel.

16. Lift the DSA assembly straight up from the transport area.

17. Rotate the DSA assembly toward you. The mounting brackets

should be pointing toward the back of the machine.

18. Replace the DSA assembly in its original position.

19. Push down and rotate the release handles inward so that they both

point toward the center of the transport to lock the DSA assembly in

place.

20. Close the front cover.

21. Turn the side panel switch on.

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 112 113 114

Pas de commentaire

Kodak A-41069 Manuel d'utilisateur Page 106