Kodak DP2000 Manuel d'utilisateur télécharger pdf (Page 48)

User’s Guide KODAK DP2000 Digital Projector

Troubleshooting

Problem: Nothing on projection screen

• Make sure that the power cord is properly connected to a

fully functional AC electrical outlet. Make sure that the

power cord is also properly connected to the projector.

• If the projector is plugged into a power strip, make sure the

power strip is turned on.

• Make sure you have removed the lens cap on the projection

lens at the front of the projector.

• Make sure the lamp is switched on.

• Check the projector’s lamp to ensure that it is securely

connected in the lamp module. See “Replacing the

Projection Lamp” on page 38.

• Make sure that the cables do not have any bent pins.

Problem: Color or text not being projected

• You might need to adjust the brightness up or down until

the text is visible. Refer to “Brightness” on page 26 for

more information.

Problem: The screen resolution is not right

• Make sure the computer’s video card is set for a resolution

of no greater than 1024 x 768.

Problem: Image isn’t centered on the screen

• Move the projector to reposition the image.

• Reposition the image using the software. Refer to

“Horizontal position” on page 29 and “Vertical position”

on page 30.

• Be sure the projector is at a 90 degree angle to the screen.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 75 76

Pas de commentaire

Kodak DP2000 Manuel d'utilisateur Page 48