Kodak DP2000 Manuel d'utilisateur télécharger pdf (Page 21)

Setting up the Projector

Connecting to a Video Player

If your video player uses a round, one-prong composite video

connector, you’ll only need the audio cable, audio adapter, and

composite video cable that shipped with the projector.

If your video player uses a round, four-prong S-video connector,

you’ll need an S-video cable in addition to the audio cable and audio

adapter. The S-video cable is sold separately.

Note: Your video player may have a "Video Out" connector for a

coaxial cable connection. Do not use this to connect to the

projector.

To connect to a video player:

1. Plug the composite video cable yellow connector into the

“video-out” connector on your video player. This connector may

be labeled “To Monitor.”

• If you’re using an S-video cable, connect it to the

“S-video out” connector on the video player.

2. Plug the other yellow connector into the composite video

connector on the back of the projector.

• If you’re using S-video, plug the other end of the cable into

the “S-video” connector on the projector.

audio adaptor

audio cable

composite

video cable

Connecting with

composite

video cable

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 75 76

Pas de commentaire

Kodak DP2000 Manuel d'utilisateur Page 21