Kodak E Manuel d'utilisateur télécharger pdf (Page 28)

SERVICE MANUAL

28 30APR96 – SM4530-1

Adjusting the SLIDE LIFT LEVER MANUAL

Warning

Dangerous Voltage

[1] Disconnect the main power.

Important

The older style MECHANISM SLIDE LIFT LEVER has an ECCENTRIC on it to do this adjustment.

[2] Do the removal for the MECHANISM ASSEMBLY.

[3] Place the MECHANISM ASSEMBLY on the MECHANISM RUNNING FIXTURE TL-3000.

[4] Press and hold the SELECT LEVER down to move the SLIDE LIFT LEVER to the highest position.

[5] Measure the height of the SLIDE LIFT LEVER. Use SLIDE LIFT LEVER GAUGE TL-3001. The SLIDE LIFT

LEVER should make contact with the low surface of the SLIDE LIFT LEVER GAUGE TL-3001; the SLIDE LIFT

LEVER should not make contact with the high surface of the SLIDE LIFT LEVER

GAUGE TL-3001.

[6] Bend the SLIDE LIFT LEVER until the adjustment is correct.

Adjustment Speciﬁcation

Use TL-3000 MECHANISM RUNNING FIXTURE. Use TL-3001 to measure the height of the SLIDE LIFT LEVER.

The LEVER should make contact with the low surface of TL-3001. The LEVER should not make contact with the

high surface of TL-3001.

A091_0016BA

TL-3001

LEVER GUAGE

SLIDE LIFT

SELECT

A091_0016BCA

(not shown)

LEVER

SLIDE LIFT

LEVER

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 53 54

Pas de commentaire

Kodak E Manuel d'utilisateur Page 28