Kodak E Manuel d'utilisateur télécharger pdf (Page 24)

SERVICE MANUAL

24 30APR96 – SM4530-1

[17] Remove the FOCUS MOTOR BRACKET ASSEMBLY.

[18] Push the RACK LEVER away from the FOCUS SHAFT ASSEMBLY.

[19] Remove the FOCUS SHAFT ASSEMBLY.

Installing the FOCUS SHAFT ASSEMBLY

Important

Do the adjustments for the PHOTOCELL NULL and AUTO-FOCUS CLAMP after installation. See the Adjustments

section.

Replacing the FOCUS SHAFT ASSEMBLY - Non Auto-Focus Models

Warning

Dangerous Voltage

[1] Disconnect the main power.

[2] Do the replacement procedure for the LOWER HOUSING ASSEMBLY.

[3] Remove the FOCUS KNOB.

[4] Remove the 3 SCREWS from the LENS MOUNT ASSEMBLY.

[5] Lift and remove the LENS MOUNT ASSEMBLY.

[6] Remove the FOCUS SHAFT SPRING from the LENS MOUNT BRACKET.

[7] Remove the E-RING and SPACER from the FOCUS SHAFT ASSEMBLY.

[8] Remove the SCREW from the LENS SUPPORT BRACKET.

[9] Lift and remove the LENS SUPPORT BRACKET.

[10] Remove the E-RING and SPACER from the FOCUS SHAFT ASSEMBLY.

[11] Remove the SCREW from the FOCUS MOTOR BRACKET ASSEMBLY.

A091_0020HA

SCREW

E-RING

SPACER

ASSEMBLY

FOCUS SHAFT

FOCUS MOTOR

BRACKET

LENS SUPPORT

SCREW

A091_0020HCA

FOCUS SHAFT

SPRING

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 53 54

Pas de commentaire

Kodak E Manuel d'utilisateur Page 24