Kodak A-61003 Manuel d'utilisateur télécharger pdf (Page 13)

A-61003 September 1993

FC-1

There are a variety of functions available which may be

used to temporarily change operating conditions and

values, and to obtain system and accessory status

information.

To execute a function code:

• Press the F key.

• Press the numeric keys which correspond to the

desired function code.

• Press the Enter key.

Additional input may be necessary:

If the function is used to enable/disable an option (turn

an option on or off):

• Press the number one (1) key to turn the option ON;

Press the number zero (0) key to turn the option OFF.

• Press the Enter key.

If the function requires numeric input:

• Press the number key(s) required.

• Press the Enter key.

If the function is used to increment/decrement a

measurement:

• Press the up arrow key to increment the

measurement by one (1) inch (25 mm);

Press the down arrow key to decrement the

measurement by one (1) inch (25 mm);

Press the right arrow key to increment the

measurement by one-eighth (1/8) inch (3 mm);

Press the left arrow key to decrement the

measurement by one-eighth (1/8) inch (3 mm).

• Press the Enter key.

To cancel a function or clear the Status Display after

executing a function, press the Clear/Cancel key.

FUNCTION CODES

USING FUNCTION CODES

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 51 52

Pas de commentaire

Kodak A-61003 Manuel d'utilisateur Page 13