Kodak Z980 Manuel d'utilisateur télécharger pdf (Page 62)

56 www.kodak.com/go/support

Troubleshooting

In Review mode,

you do not see a

picture (or the

expected picture)

on the LCD or EVF.

■ Check the image storage location setting (page 44).

In Review mode, a

blue or black

screen is displayed

instead of a

picture.

■ Transfer the picture to the computer (see page 48), then format the

card or internal memory (see page 46).

CAUTION: Formatting a card deletes all pictures and videos,

including protected files.

Slide show does

not run on external

video device.

■ Check the cable connections.

■ Adjust the camera Video Out setting (NTSC or PAL, see page 45).

■ See the external device’s user’s guide.

Picture is too light. ■ Turn off the flash, or move so there is at least 2 ft (0.6 m) between the

camera and the subject.

■ Decrease Exposure Compensation (see page 21).

Picture is not clear. ■ Clean the lens (see page 68).

■ Make sure your camera is not in Close-up mode.

■ Move so there is at least 2 ft (0.6 m) between the camera and the

subject.

■ Press the shutter button halfway to focus and set exposure. When the

framing brackets turns green, press the Shutter button completely

down.

■ Place the camera on a flat, steady surface or use a tripod.

Picture is too dark. ■ Turn on the flash (see page 14).

■ Move so there is no more than 11.8 ft (3.6 m) in wide angle and

6.9 ft (2.1 m) in telephoto between the camera and the subject.

■ Use Fill flash (see page 14) or change your position so light is not

behind the subject.

■ Increase Exposure Compensation (see page 21).

If Try one or more of the following

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 84 85

Pas de commentaire

Kodak Z980 Manuel d'utilisateur Page 62